30 watts solar panel

Prostar 30 watts solar panel monocrystalline 12 volts

Solar Panel 30w | 12V/18V | Monocrystalline | Dimension: 340x620x20mm

Category:
SKU: PMS30W

Prostar 30 watts solar panel monocrystalline 12 volts

Prostar 30 watts solar panel is made with monocrystalline silicon solar cells, which are easily recognizable by the even dark coloring of the cells.  Monocrystalline solar cells are made out of silicon ingots, which are cylindrical in shape. To optimize performance and lower costs of a single monocrystalline solar cell, four sides are cut out of the cylindrical ingots to make silicon wafers, which is what gives monocrystalline solar panels their characteristic look.

These solar modules are designed to be 18 voltage, suitable to charge 12 voltage battery or power 12 voltage DC load, like solar street lights.

Solar panels refer either to a photovoltaic module, a solar hot water panel, or to a set of solar photovoltaic (PV) modules electrically connected and mounted on a supporting structure. A PV module is a packaged, connected assembly of solar cells.

Monocrystalline solar panel uses the latest innovative cell technology, increasing module power output and system reliability, ensured by 20 years of experience in module manufacturing, well-engineered module design, stringent BOM quality testing, an automated manufacturing process and 100% EL testing.

The small size of the Prostar 30 Watts 12 Volt Monocrystalline Solar Panel makes it perfect to take with you and for small solar projects! You’ll have no problem using this panel to charge your favorite small electronics while on-the-go.Prostar 30W monocrystalline panel will give you the most efficiency per space.

Prostar 30 watts solar panel monocrystalline can also perform better in higher temperatures and shady conditions, though there will only be marginal efficiency differences. Paying a higher upfront price for monocrystalline panels might also make the most economic sense in the long run if you buy your system as opposed to leasing it. With a higher efficiency and more energy generated, you might see a greater return on your investment in the form of lower energy bills.

  Product Features & Benefits  

1. Higher energy yield:
– Outstanding performance at low irradiance
– Maximum energy yield at low NOCT(dirty effect)
– Improved energy production through reduced cell series resistance
– IP67 junction box available long-term weather endurance

2. Increased system reliability:
-Enhanced system performance stability with PID resistant technology
-Enhanced system reliability in extreme temperature environment with special cell level stress release technology
-Great for solar street light or off-grid applications from marine-related to dry camping.

3. Extra value to customers:
-Positive power tolerance up to 5w
– EL tested solar modules; no hot-spot heating guaranteed

-Stronger 40mm robust frame to hold 5400Pa load
-Salt mist, ammonia and blowing sand resistance apply
-To seaside, farm and desert environment
-25 years linear performance warranty

  Product Details  

monocrystalline solar panels

monocrystalline solar panels

monocrystalline solar panels

monocrystalline solar panels

 Other Products 

Also You May Like:

Prostar > About Prostar

Prostar > Inverter

Prostar > Prostar Competitive Advantage

Prostar > Inverter Batteries

You also can browse Prostar Solar Factory

Request A Quote

Model PMS30W
Electrical Data
Maximum Power (Pmax) 30Wp
 Maximum Power Voltage (Vmp) 18.0V
Maximum Power Current (Imp) 1.67A
Open Circuit Voltage (Voc) 22.5V
Short Circuit Current (Isc) 1.80A
Power Tolerance(Positive) 5%
Module Efficiency STC 14.23%
Operating Temperature Range -40°C to +85°C
Maximum System Voltage 715VDC (IEC)
Series Fuse Rating 8A
Temperature Coefficient of Pmax -0.40%/°C
Temperature Coefficient of Voc -0.30%/°C
Temperature Coefficient of Isc 0.05%/°C
Nominal Operating Cell Temperature(NOCT) 45±2°C
Application Class Class A
Mechanical Characteristics
Cell Type Monocrystalline 156
Cell Number 36 (4×9)
Dimensions (mm) 340x620x20
Weight(Kgs) 2.30(approx)
Front Glass 3.2 mm, High Transmission, Low Iron,Tempered Glass
Frame Type Anodized Aluminium Alloy
Junction Box Protection Class IP 67 Rated
Connector Type MC4 (optional)
Output Cables TUV 1×2.5 mm², Length:900 mm (optional)
Standard Test Conditions (STC): Irradiance 1000W/m2, AM 1.5, Cell temperature 25°C

Nominal Operating Cell Temperature (NOCT): Irradiance  800W/m2, AM 1.5, Wind Speed 1m/s, Ambient temperature 20°C