Prostar MG1KTL single phase on grid solar inverter 1000w

Prostar on grid solar inverter converts direct current (DC) into an alternating current (AC) suitable for injecting into an electrical power grid.

SKU: MG1KTL Category:

Inverter 1000w produce the pure sine wave that is compatible with the alternating current waveform produced by your utility company.

Prostar on grid solar inverter converts direct current (DC) into an alternating current (AC) suitable for injecting into an electrical power grid.  In order to inject electrical power efficiently and safely into the grid, grid-tie inverters must accurately match the voltage and phase of the grid sine wave AC waveform.

Prostar single phase on grid solar inverter 1000w converts DC power generated by solar and wind electric systems into AC power used by most domestic electrical devices and your grid tie power inverter will do the same, pumping AC electricity back into the electric “grid” and offsetting your power consumption and cash outlay.

On grid solar inverter system is significantly simpler and less costly than solar inverter systems that are completely disconnected from the electric utility grid (off-grid). A grid tie inverter system essentially consists of just four major components in addition to the wiring: solar panel array, solar panel mounts, the on grid solar inverter 1000w itself, and overcurrent protection (fuses, combiners boxes, and disconnects). Whereas, off grid inverter systems require the addition of solar charge controllers, battery bank and additional overcurrent protection and wiring.

Inverter 1000w Features & Benefits

Smart

  • Smart grid adaptive to meet the requirements of various power grid access.
  • Variety of monitoring modes: APP, large screen data monitoring center, cloud monitoring platform
  • Support RS485, RS232, GPRS, Wifi

Efficient

  • Germany Core Technology
  • Max. efficiency: 99.90%
  • Euro Efficiency: 96.00%
  • Adapt to the complex conditions of roof, improve power generation

Safety

  • IP65 high protection grade
  • Various protection
  • AFD protection

Reliable

  • Natural cooling
  • Transformerless

Simple

  • Home Application design, easy to operation
  • Small size, light in weight, easy to install

Inverter 1000w system structure

1000w inverter connection

 

Other Service

Prostar Product Range

The Article You may Like

 

Request Product Price

Model MG1KTL
Phase 1-phase in / 1-phase out (L+N+PE)
Installation Type Wall Mounting Type
Size, D X W X H (mm) 280x300x138
Net Weight (Kgs) 5.5
Input(DC)
Max. DC Power (W) 1200
Maximum DC Voltage (V) 450
MPPT Voltage Range (V) 60-400
Start-up Voltage (V) 80
Min. Operation Voltage (V) 60
Number of MPP Trackers 1
String per MPPT 1
Maximum Input Current (A) 9×1
DC Switch Optional
Output(AC)
AC Nominal Power(W) 1000
Nominal AC Voltage(V) 230
AC Voltage Range(V) 180~277
AC Grid Frequency Range(Hz) 50Hz(44~55Hz) / 60Hz(54~65Hz)
Max. AC Output Current(A) 4.5
Power Factor @ Rated Power >=0.99
THDi @ Rated Power < 3%
Efficiency
Maximum Efficiency 96.90%
Euro Efficiency 96.00%
MPPT efficiency 99.90%
Protection
DC Reverse-Polarity Protection Yes
PV array Insulation Protection Yes
 PV array Leakage Current Yes
Ground Fault Monitoring Yes
DC Insulation Monitoring Yes
Grid Monitoring Yes
Thermal Protection Yes
Anti-island protection monitoring AFD
AC Short Circuit Protection Yes
Over Current Protection Yes
Interface
AC Connection Plug-in connector
DC Connection MC4
Datalogger & Communication RS485 (standard); WiFi, Ethernet (optional)
General Data
Cooling Method Natural Cooling
Self-consumption(at night) (W) <1
Consumption at Standby (W) <6
Topology Transformerless
Display LED (standard) / LCD(optional)
LCD Language English, Chinese, German, Dutch
Environment
Humidity 0~95%, no condensation
Operating Temperature -25℃~+60℃ (45°C to 60°C with derating)
Noise <15
Altitude Up to 2000m (without derating)
Protection Grade IP65
Standard
Grid Standard DIN VDE 0126-1-1:2013,VDE-AR-N 4105:2011,DIN VDE V 0124-100:2012, EN 50438:2013,G83-2 :2012,IEC 61727(IEC62116),AS/NZS 4777.2:2015,NB/T32004-2013,IEC 60068-2-1:2007,IEC 60068-2-2:2007,
IEC 60068-2-14:2009,IEC 60068-2-30:2005,IEC 61683:1999,C10/11,TF3.2.1
Safe Certificate IEC 62109-1 :2010,IEC 62109-2 :2011, EN 61000-6-2: 2005
EMC Category EN 61000-6-3:2007/A1:2011
Standard Warranty [Year] 5 (Standard)/10/15/20/25 (Optional)