Grid tie inverter 4000W | Single Phase | 220V/230V | MPPT Current: 12Ax2
Prostar MG4KTL-2M dual MPPT single phase on grid 4000w solar inverter produce the pure sine wave that is compatible with the alternating current waveform produced by your utility company.
Prostar on grid solar inverter converts direct current (DC) into an alternating current (AC) suitable for injecting into an electrical power grid. In order to inject electrical power efficiently and safely into the grid, grid-tie inverters must accurately match the voltage and phase of the grid sine wave AC waveform.
With industry-leading technology, Prostar MG4KTL-2M dual MPPT single phase on grid 4000w solar inverter naturally rises to the top of the pack. Its incredible 99.2% peak efficiency rating means that you’ll be saving money and time by maximizing your power production.
Prostar MG4KTL-2M dual MPPT single phase on grid 4000w solar inverter pure sine wave converts DC power generated by solar and wind electric systems into AC power used by most domestic electrical devices and your grid tie power inverter will do the same, pumping AC electricity back into the electric “grid” and offsetting your power consumption and cash outlay.
Low cost and easy installation–Prostar MG4KTL-2M dual MPPT single phase on grid 4000w solar inverter can make full use of all types of buildings’ surface that face to the sun in the city as well as fast and easy installation of solar modules and grid tie inverter. It just needs very low maintenance costs.
On grid solar inverter system is significantly simpler and less costly than solar inverter systems that are completely disconnected from the electric utility grid (off-grid). A grid tie inverter system essentially consists of just four major components in addition to the wiring: solar panel array, solar panel mounts, the 3000w solar power inverter itself, and overcurrent protection (fuses, combiners boxes, and disconnects). Whereas, off grid inverter systems require the addition of solar charge controllers, battery bank and additional overcurrent protection and wiring.
|Phase||1-phase in / 1-phase out (L+N+PE)|
|Installation Type||Wall Mounting Type|
|Size, D X W X H (mm)||405×360×150|
|Net Weight (Kgs)||12|
|Max. DC Power (W)||4800|
|Maximum DC Voltage (V)||600|
|MPPT Voltage Range (V)||120-550|
|Start-up Voltage (V)||120|
|Min. Operation Voltage (V)||100|
|Number of MPP Trackers||2|
|String per MPPT||1|
|Maximum Input Current (A)||12×2|
|AC Nominal Power(W)||4000|
|Nominal AC Voltage(V)||230|
|AC Voltage Range(V)||180~277|
|AC Grid Frequency Range(Hz)||50Hz(44~55Hz) / 60Hz(54~65Hz)|
|Max. AC Output Current(A)||20|
|Power Factor @ Rated Power||>=0.99|
|THDi @ Rated Power||< 3%|
|DC Reverse-Polarity Protection||Yes|
|PV array Insulation Protection||Yes|
|PV array Leakage Current||Yes|
|Ground Fault Monitoring||Yes|
|DC Insulation Monitoring||Yes|
|Anti-island protection monitoring||AFD|
|AC Short Circuit Protection||Yes|
|Over Current Protection||Yes|
|AC Connection||Plug-in connector|
|Datalogger & Communication||RS485 (standard); WiFi, Ethernet (optional)|
|Cooling Method||Natural Cooling|
|Self-consumption(at night) (W)||<1|
|Consumption at Standby (W)||<6|
|Display||LED (standard) / LCD(optional)|
|LCD Language||English, Chinese, German, Dutch|
|Humidity||0~95%, no condensation|
|Operating Temperature||-25℃~+60℃ (45°C to 60°C with derating)|
|Altitude||Up to 2000m (without derating)|
|Grid Standard||VDE-AR-N4105, G83/2, C10/11, TF3.2.1, AS4777/3100,CQCEN61000-6-1:4,
EN61000-3-2:3, EN61000-11:12, IEC 62109-1:2010, LVRT
|Safe Certificate||IEC 62109-1 :2010,IEC 62109-2 :2011, EN 61000-6-2: 2005|
|EMC Category||EN 61000-6-3:2007/A1:2011|
|Standard Warranty [Year]||5 (Standard)/10/15/20/25 (Optional)|