grid tie power inverter 8000w

Prostar MG5KTL-2M dual MPPT single phase solar grid tie inverter 5000w

Grid tie inverter 5000W | Single Phase | 220V/230V | MPPT Current: 15Ax2

SKU: MG5KTL-2M Category:

Prostar MG5KTL-2M dual MPPT single phase solar grid tie inverter 5000w produce the pure sine wave that is compatible with the alternating current waveform produced by your utility company.

Prostar on grid solar inverter converts direct current (DC) into an alternating current (AC) suitable for injecting into an electrical power grid.  In order to inject electrical power efficiently and safely into the grid, grid-tie inverters must accurately match the voltage and phase of the grid sine wave AC waveform.

With industry-leading technology, Prostar MG5KTL-2M dual MPPT grid tie inverter 5000w naturally rises to the top of the pack. Its incredible 99.2% peak efficiency rating means that you’ll be saving money and time by maximizing your power production.

Prostar dual MPPT single phase grid tie inverter 5000w pure sine wave converts DC power generated by solar and wind electric systems into AC power used by most domestic electrical devices and your grid tie power inverter will do the same, pumping AC electricity back into the electric “grid” and offsetting your power consumption and cash outlay.

 

grid tie inverter 5000 watt

Grid tie solar inverter Features & Benefits

Smart

  • Smart grid adaptive to meet the requirements of various power grid access.
  • Variety of monitoring modes: APP, large screen data monitoring center, cloud monitoring platform
  • Support RS485, RS232, GPRS, Wifi

Efficient

  • Germany Core Technology
  • Max. efficiency: 99.90%
  • Euro Efficiency: 96.10%
  • Adapt to the complex conditions of roof, improve power generation

Safety

  • IP65 high protection grade
  • Various protection
  • AFD protection

Reliable

  • Natural cooling
  • Transformerless

Simple

  • Home Application design, easy to operation
  • Small size, light in weight, easy to install

Grid tie solar inverter system structure

grid tie inverter

Low cost and easy installation–Prostar dual MPPT single phase solar grid tie inverter 5000w can make full use of all types of buildings’ surface that face to the sun in the city as well as fast and easy installation of solar modules and grid tie inverter. It just needs very low maintenance costs.

On grid solar inverter system is significantly simpler and less costly than solar inverter systems that are completely disconnected from the electric utility grid (off-grid). A grid tie inverter system essentially consists of just four major components in addition to the wiring: solar panel array, solar panel mounts, the 5000w solar power inverter itself, and overcurrent protection (fuses, combiners boxes, and disconnects). Whereas, off grid inverter systems require the addition of solar charge controllers, battery bank and additional overcurrent protection and wiring.

Other Service

Prostar Product Range

The Article You may Like

Request Product Price

Model MG5KTL-2M
Phase 1-phase in / 1-phase out (L+N+PE)
Installation Type Wall Mounting Type
Size, D X W X H (mm) 405×360×150
Net Weight (Kgs) 15
Input(DC)
Max. DC Power (W) 5000
Maximum DC Voltage (V) 600
MPPT Voltage Range (V) 120-550
Start-up Voltage (V) 120
Min. Operation Voltage (V) 100
Number of MPP Trackers 2
String per MPPT 1
Maximum Input Current (A) 15×2
DC Switch Optional
Output(AC)
AC Nominal Power(W) 5000
Nominal AC Voltage(V) 230
AC Voltage Range(V) 180~277
AC Grid Frequency Range(Hz) 50Hz(44~55Hz) / 60Hz(54~65Hz)
Max. AC Output Current(A) 24
Power Factor @ Rated Power >=0.99
THDi @ Rated Power < 3%
Efficiency
Maximum Efficiency 97.80%
Euro Efficiency 96.80%
MPPT efficiency 99.90%
Protection
DC Reverse-Polarity Protection Yes
PV array Insulation Protection Yes
 PV array Leakage Current Yes
Ground Fault Monitoring Yes
DC Insulation Monitoring Yes
Grid Monitoring Yes
Thermal Protection Yes
Anti-island protection monitoring AFD
AC Short Circuit Protection Yes
Over Current Protection Yes
Interface
AC Connection Plug-in connector
DC Connection MC4
Datalogger & Communication RS485 (standard); WiFi, Ethernet (optional)
General Data
Cooling Method Natural Cooling
Self-consumption(at night) (W) <1
Consumption at Standby (W) <6
Topology Transformerless
Display LED (standard) / LCD(optional)
LCD Language English, Chinese, German, Dutch
Environment
Humidity 0~95%, no condensation
Operating Temperature -25℃~+60℃ (45°C to 60°C with derating)
Noise (dB) <15
Altitude Up to 2000m (without derating)
Protection Grade IP65
Standard
Grid Standard VDE-AR-N4105, G83/2, C10/11, TF3.2.1, AS4777/3100,CQCEN61000-6-1:4,
EN61000-3-2:3, EN61000-11:12, IEC 62109-1:2010, LVRT
Safe Certificate IEC 62109-1 :2010,IEC 62109-2 :2011, EN 61000-6-2: 2005
EMC Category EN 61000-6-3:2007/A1:2011
Standard Warranty [Year] 5 (Standard)/10/15/20/25 (Optional)