Hybrid bi-directional pv inverter 12kW | 48Vdc | 180A MPPT Solar Charging Current | MPPT Voltage Range: 60VDC ~130VDC
Prostar MIS12K-48 Plus hybrid bi-directional 3 phase inverter 12kw 48v is three phase, flexible and intelligent hybrid Bi-directional PV inverter which utilizes solar power, AC utility and battery power source to supply continuous power. It is built-in an isolation transformer, which supplies galvanic isolation not only to protect against electric shock between the ground and energized conductors, but also suppress electrical noise and are used for supplying power in sensitive devices like computers, refrigerator, air conditioner, medical devices and laboratory instruments. It is a simple and smart solar power storage system for home users to either store energy into battery bank and wait for night-time usage or user for self-consumption first depending on demands and feed excess power back into the grid.
During night time or power failure, Prostar MIS12K-48 Plus hybrid bi-directional 3 phase inverter 12kw 48v will automatically extract power from battery. In this way, it will reduce the dependence on the utility.
In comparison with conventional grid-tie inverter, MixSolar Plus MIS12K-48 Plus hybrid bi-directional 3 phase inverter 12kw 48v is able to not only feed-in power to grid but also store solar power to battery for future usage and directly power to the loads.
MixSolar Plus hybrid bi-directional solar inverter can save money by using battery energy frst when PV energy is low. Until battery energy is low, will extract AC power from the grid.
MixSolar Plus hybrid bi-directional 3 phase inverter 12kw 48v can operate as an off-grid inverter to provide continuous power even without the grid. It’s perfect power solution for remote regions or temporary AC power source such as camping or flea market.
1- Advanced DSP control technology delivers accurate data Pure sine wave output
2- Built-in 180A MPPT solar charge controller
3- Built-in isolation transformer
4- MPPT Efficiency max 98%
5- Self-consumption and Feed-in to the grid
6- Multiple operation modes: Grid Tie, Stand-alone and Grid-Tie with back-up
7- Programmable supply priority for PV, Battery or Grid
8- LCD display panel for comprehensive information
9- User-adjustable battery charging current suits different types of batteries
10- Green substitution for generators
11- Set up Zero feed in to the grid
12- Cold start function
13- Support CAN, RS485 monitoring function with free CD
14- WIFI/GPS for real-time status display and control [optional]
– 3 Phase hybrid solar inverter front –
– 3 Phase hybrid solar inverter rear –
Model | MIS12K-48 Plus |
PHASE | 3-phase in/3-phase out |
RATED POWER | 12KW |
Dimension DxWxH (mm) | 555x391x836 |
Net Weight (kgs) | 140.00 |
INPUT | |
Voltage | 220VAC/230VAC/240VAC (P-N) / 380VAC/400VAC/415VAC (P-P) |
Acceptable Voltage Range | 186VAC – 253 VAC per phase (Default) |
174VAC – 272VAC per phase (Narrow) | |
95VAC – 272VAC per phase (Wide) | |
Frequency Range | 50 Hz/60 Hz (Auto sensing) |
AC Maximum Current | 34.8A per phase |
OUTPUT | |
Voltage | 220VAC/230VAC/240VAC (P-N) / 380VAC/400VAC/415VAC (P-P) |
Frequency | 50 Hz/60 Hz |
Surge Power | 24KW |
Nominal Output Current | 17.4A per phase |
Efficiency (Peak) | >93% |
Hormonic Distortion | Off grid <= 2%, Grid discharge <=3%, Grid charge <=3% @Liner Load |
Power Factor | 0.9 lead – 0.9 lag |
Overload Capacity | <=110% 30mins; <=125% 1 mins; <=150% 30s; >150% 10s; Short circuit 5s |
Waveform | Pure sine wave |
BATTERY & AC CHARGER | |
Battery Voltage | 48 VDC |
Floating Charge Voltage | 54.8 VDC |
Overcharge Protection | 60.0VDC |
Low Voltage Protection Point | Charger: 34.0VDC; Inverter: 40.0VDC |
SOLAR CHARGER & AC CHARGER | |
Maximum PV Array Power | 10080W |
MPPT Operating Voltage Range | 60 ~130 VDC |
Maximum PV Array Open Circuit Voltage | 145 VDC |
Maximum Solar Charge Current | 60A per phase |
Maximum AC Charge Current | 80A per phase |
Maximum Charge Current | 140A per phase |
MPPT Maximum Efficiency | 98% |
OPERATING ENVIRONMENT | |
IP Class | IP20 |
Humidity | 0 to 95% Relative Humidity(Non-condensing) |
Operating Temperature | 0°C to 55°C |
Storage Temperature | -15°C to 60°C |
MANAGEMENT | |
Communication Interface | RS-485/USB and CAN |
Optional SNMP | Power management from SNMP manager and web browser |
Product specifications are subject to change without further notice. |