solar panel 330w

Prostar monocrystalline solar panel 330w for home solar power system

Monocrystalline 156x156 mm/5BB | Dimension: 990x1940x40mm

SKU: PMS330M-72 Category:

Prostar monocrystalline solar panel 330w for home solar power system

Prostar monocrystalline solar panel 330w is made with monocrystalline silicon solar cells, which are easily recognizable by the even dark coloring of the cells.  Monocrystalline solar cells are made out of silicon ingots, which are cylindrical in shape. To optimize performance and lower costs of a single monocrystalline solar cell, four sides are cut out of the cylindrical ingots to make silicon wafers, which is what gives monocrystalline solar panels their characteristic look.

Prostar monocrystalline solar panel 330w can be used as a component of a larger photovoltaic system to generate and supply electricity in commercial and residential applications. Each module is rated by its DC output power under standard test conditions (STC).

Solar panels refer either to a photovoltaic module, a solar hot water panel, or to a set of solar photovoltaic (PV) modules electrically connected and mounted on a supporting structure. A PV module is a packaged, connected assembly of solar cells.

Monocrystalline solar panel uses the latest innovative cell technology, increasing module power output and system reliability, ensured by 18 years of experience in module manufacturing, well-engineered module design, stringent BOM quality testing, an automated manufacturing process and 100% EL testing.

Monocrystalline solar panel 330w can also perform better in higher temperatures and shady conditions, though there will only be marginal efficiency differences. Paying a higher upfront price for monocrystalline panels might also make the most economic sense in the long run if you buy your system as opposed to leasing it. With a higher efficiency and more energy generated, you might see a greater return on your investment in the form of lower energy bills.

  Product Features & Benefits  

1. Higher energy yield:
– Outstanding performance at low irradiance
– Maximum energy yield at low NOCT(dirty effect)
– Improved energy production through reduced cell series resistance
– IP67 junction box available long-term weather endurance

2. Increased system reliability:
-Enhanced system performance stability with PID resistant technology
-Enhanced system reliability in extreme temperature environment with special cell level stress release technology

3. Extra value to customers:
-Positive power tolerance up to 5w
-Stronger 40mm robust frame to hold 5400Pa load
-Salt mist, ammonia and blowing sand resistance apply
-To seaside, farm and desert environment
-25 years linear performance warranty

  Product Details  

monocrystalline solar panels

monocrystalline solar panels

monocrystalline solar panels

monocrystalline solar panels

 Other Products 

Also You May Like:

Prostar > About Prostar

Prostar > Inverter

Prostar > Prostar Competitive Advantage

Prostar > Inverter Batteries

You also can browse Prostar Solar Factory

    Request Product Price



    * Required

    ModelPMS330M-72
    Electrical Data
    Maximum Power (Pmax)330Wp
     Maximum Power Voltage (Vmp)38.2V
    Maximum Power Current (Imp)8.64A
    Open Circuit Voltage (Voc)46.7V
    Short Circuit Current (Isc)9.34A
    Power Tolerance(Positive)5%
    Module Efficiency STC17.18%
    Operating Temperature Range-40°C to +85°C
    Maximum System Voltage1000VDC (IEC)
    Series Fuse Rating15A
    Temperature Coefficient of Pmax-0.39%/°C
    Temperature Coefficient of Voc-0.29%/°C
    Temperature Coefficient of Isc0.05%/°C
    Nominal Operating Cell Temperature(NOCT)45±2°C
    Application ClassClass A
    Mechanical Characteristics
    Cell TypeMonocrystalline 156×156 mm / 5BB
    Cell Number72 (6×12)
    Dimensions (mm)990x1940x40
    Weight(Kgs)21.00(approx)
    Front Glass3.2 mm, High Transmission, Low Iron,Tempered Glass
    Frame TypeAnodized Aluminium Alloy
    Junction Box Protection ClassIP 67 Rated
    Connector TypeMC4
    Output CablesTUV 1×4 mm² / UL 12AWG, Length:900 mm
    Standard Test Conditions (STC): Irradiance 1000W/m2, AM 1.5, Cell temperature 25°C

    Nominal Operating Cell Temperature (NOCT): Irradiance  800W/m2, AM 1.5, Wind Speed 1m/s, Ambient temperature 20°C