Solar Panel 130w | 12V/18V | Monocrystalline | Dimension: 670x1070x30mm
Prostar PMS130W photovoltaic 12 volt 130 watt solar panel mono is made with monocrystalline silicon solar cells, which are easily recognizable by the even dark coloring of the cells. Monocrystalline solar cells are made out of silicon ingots, which are cylindrical in shape. To optimize performance and lower costs of a single monocrystalline solar cell, four sides are cut out of the cylindrical ingots to make silicon wafers, which is what gives monocrystalline solar panels their characteristic look.
These solar modules are designed to be 18 voltage, suitable to charge 12 voltage battery or power 12 voltage DC load, like solar street lights.
Prostar PMS130W photovoltaic 12 volt 130 watt solar panel uses the latest innovative cell technology, increasing module power output and system reliability, ensured by 20 years of experience in module manufacturing, well-engineered module design, stringent BOM quality testing, an automated manufacturing process and 100% EL testing.
Prostar PMS130W photovoltaic 12 volt 130 watt solar panel can also perform better in higher temperatures and shady conditions, though there will only be marginal efficiency differences. Paying a higher upfront price for monocrystalline panels might also make the most economic sense in the long run if you buy your system as opposed to leasing it. With a higher efficiency and more energy generated, you might see a greater return on your investment in the form of lower energy bills.
The Tempered glass covered PV Cells protects the panel from hazardous weather. Prostar PMS130W photovoltaic 12 volt 130 watt solar panel comes with a pre-drilled aluminum outer frame suitable for mounting in various ways. This photovoltaic 12 volt 130 watt solar panel is perfect for home installations, vehicle and RV installations as well as industrial applications. It can be used in parallel and series to suit your voltage needs. Buy multiple panels to power your whole house or reduce your power bill for off-grid or on-grid living.
1. Higher energy yield:
– Outstanding performance at low irradiance
– Maximum energy yield at low NOCT(dirty effect)
– Improved energy production through reduced cell series resistance
– IP67 junction box available long-term weather endurance
2. Increased system reliability:
-Enhanced system performance stability with PID resistant technology
-Enhanced system reliability in extreme temperature environment with special cell level stress release technology
-Great for solar street light or off-grid applications from marine-related to dry camping.
3. Extra value to customers:
-Positive power tolerance up to 5w
-EL tested solar modules; no hot-spot heating guaranteed
-Stronger 40mm robust frame to hold 5400Pa load
-Salt mist, ammonia and blowing sand resistance apply
-To seaside, farm and desert environment
-25 years linear performance warranty
|Maximum Power (Pmax)||130Wp|
|Maximum Power Voltage (Vmp)||18.0V|
|Maximum Power Current (Imp)||7.22A|
|Open Circuit Voltage (Voc)||22.5V|
|Short Circuit Current (Isc)||7.80A|
|Module Efficiency STC||18.13%|
|Operating Temperature Range||-40°C to +85°C|
|Maximum System Voltage||1000VDC (IEC)|
|Series Fuse Rating||15A|
|Temperature Coefficient of Pmax||-0.40%/°C|
|Temperature Coefficient of Voc||-0.30%/°C|
|Temperature Coefficient of Isc||0.05%/°C|
|Nominal Operating Cell Temperature(NOCT)||45±2°C|
|Application Class||Class A|
|Cell Type||Monocrystalline 156.75|
|Cell Number||36 (4×9)|
|Front Glass||3.2 mm, High Transmission, Low Iron,Tempered Glass|
|Frame Type||Anodized Aluminium Alloy|
|Junction Box Protection Class||IP 67 Rated|
|Output Cables||TUV 1×2.5 mm², Length:900 mm|
|Standard Test Conditions (STC): Irradiance 1000W/m2, AM 1.5, Cell temperature 25°C
Nominal Operating Cell Temperature (NOCT): Irradiance 800W/m2, AM 1.5, Wind Speed 1m/s, Ambient temperature 20°C