Half cell Solar Panel 335w | 5BB PERC | Monocrystalline | Dimension: 1708x1000x35mm
Prostar PMS335M-120 half-cut cell solar module monocrystalline 335W has solar cells that are cut in half, which improves the solar module’s performance and durability. Traditional 60-cell and 72-cell solar panels will have 120 half-cut cells and 144 half-cut cells, respectively. When solar cells are halved, their current is also halved, so resistive losses are lowered and the solar cells can produce more power.
Prostar PMS335M-120 half-cut cell solar module monocrystalline 335W has higher output, efficiency and ROI due to reduced “Cell To Module” loss, 6% less internal power loss due to shorter ribbon length and 50% higher yield due to better shading response. Half cell modules also have twice less mismatch loss due to double internal strings of cells in compare with conventional monocristalline panels.
-1- 5 busbar cell design improves module efficiency and offers better aesthetic appearance for rooftop installations
-2- IP68 junction box for long-term weather endurance
-3- Limited power degradation of Eagle module caused by PID effect is guaranteed under strict testing condition (85℃/85%RH,96hours)for mass production
-4- Higher module conversion efficiency thanks to half-cut cell design
-5- LOW hot spot temperature risk
-6- Advanced glass and cell surface textured design ensure excellent performance in low-light environment
-7- Less shade impact
-8- High salt mist and ammonia resistance certified by TÜV NORD
Solar cells are cut in half to reduce the cell-to-module losses during assembly. Power loss is generally proportional to the square of the current times resistance.
Splitting the cell into two halves the current (not the voltage) of the cell, so when you apply this change to the equation the losses are reduced by 75%. The overall panel efficiency increased by 1,5-3% and this results in a reduction in panel heat production.
Standard solar panels have one junction box that cables come out of located on the back of the panel near the top. Panels with half cut solar cells can have junction boxes that are split into three, as you can see in this picture of half cut panel. The middle box is for the middle bypass diode.
Product Tags: | half-cut cell | solar module | monocrystalline 335W |
Model | PMS335M-120 |
Electrical Data | |
Maximum Power (Pmax) | 325Wp |
Maximum Power Voltage (Vmp) | 34.4V |
Maximum Power Current (Imp) | 9.74A |
Open Circuit Voltage (Voc) | 41.0V |
Short Circuit Current (Isc) | 10.29A |
Power Tolerance(Positive) | 5% |
Module Efficiency STC | 19.61% |
Maximum System Voltage | 1000VDC (IEC), 600VDC(UL) |
Series Fuse Rating | 15A |
Temperature Coefficient of Pmax | -0.36%/°C |
Temperature Coefficient of Voc | -0.28%/°C |
Temperature Coefficient of Isc | 0.04%/°C |
Application Class | Class A |
Qualification Test Parameters | |
Dielectric Insulation Voltage | 6000VDC max |
Operating Temperature Range | -40°C to +85°C |
Max. Snow Load | 5400Pa |
Max. Wind Load | 2400Pa |
Hailstone Impact | 25mm(1inch) at 23m/s(52mph) |
Fire Rating | Class C |
Nominal Operating Cell Temperature(NOCT) | 45±2°C |
Mechanical Characteristics | |
Cell Type | Monocrystalline 158.75×79.36mm / 5BB PERC |
Cell Number | 120 (6×20) |
Dimensions (mm) | 1708x1000x35 |
Weight(Kgs) | 18.80(approx) |
No. of Draining Holes in Frame | 16 |
Front Glass | 3.2 mm, High Transmission, Low Iron,Tempered Glass |
Frame Type | Clear Anodized Aluminium Alloy Type 6063T5 |
Junction Box Protection Class | IP 68 Rated |
Connector Type | Compatible type MC4 |
Output Cables | TUV 1×4 mm² / UL 12AWG, Length:300±5 mm |
Packing Configuration | |
Packing Type | 31Pcs/CTN, 2Pcs/CTN |
Container Loading | 858Pcs/40HQ, 330Pcs/20GP |
Standard Test Conditions (STC): Irradiance 1000W/m2, AM 1.5, Cell temperature 25°C
Nominal Operating Cell Temperature (NOCT): Irradiance 800W/m2, AM 1.5, Wind Speed 1m/s, Ambient temperature 20°C |