Half-cut Cell Mono PERC Solar Panel 340W 120Cells

Prostar PMS340M-120 mono perc half cell solar module 340w 120 cells

Half cell Solar Panel 340w | 5BB PERC | Monocrystalline | Dimension: 1708x1000x35mm

SKU: PMS340M-120 Category:

Prostar PMS340M-120 mono perc half cell solar module 340w 120 cells is increased efficiency of half cut solar cells produce higher power output compared to a traditional solar module. This in turn increased the overall efficiency of the entire solar power system – be it solar power packs, rooftop solar power plants and land based solar power plants.

Smaller cells experience reduced mechanical stresses, reaching a decreased opportunity for cracking. Prostar PMS340M-120 mono perc half cell solar module 340w 120 cells has higher output ratings and are more reliable than conventional solar panels.

Half-cut Cell Mono Solar Module Installation

Today new solar module generation technology has increased the module output of up to 15 watts per module, compared to standard solar modules. Boasting the efficiency of up to 19.99%.

Prostar PMS340M-120 mono perc half cell solar module 340w 120 cells consists of conventional 158.75×158.75mm monocrystalline silicon cells cut in half. So 60-cells standard PV module becomes 120-cells half-cell PV module. As a result, new half cells have shorter bus bar conductors. The shorter conductors mean less amperage, thus, lower resistance. Lower resistance reduces power loss to 6% and increase the output power from 5W to 8W per module. It means 16.5% lower risk of hot-spots due to lower temperature in partially shaded cells compared to standart full cell modules.

Half Cell Solar Module Features

-1- 5 busbar cell design improves module efficiency and offers better aesthetic appearance for rooftop installations

-2- IP68 junction box for long-term weather endurance

-3- Limited power degradation of Eagle module caused by PID effect is guaranteed under strict testing condition (85℃/85%RH,96hours)for mass production

-4- Higher module conversion efficiency thanks to half-cut cell design

-5- LOW hot spot temperature risk

-6- Excellent space utilization performance, increasing power density effectively and reducing costs of solar panel

-7- Lower temperature coefficient, zero depth reflection increasing

-8- High salt mist and ammonia resistance certified by TÜV NORD

Why cut solar cell in half?

Solar cells are cut in half to reduce the cell-to-module losses during assembly. Power loss is generally proportional to the square of the current times resistance.

Half-cut Cell Electrical Losses

Splitting the cell into two halves the current (not the voltage) of the cell, so when you apply this change to the equation the losses are reduced by 75%. The overall panel efficiency increased by 1,5-3% and this results in a reduction in panel heat production.

Half-cut Cell Solar Panel Details

Split Junction Box

Panels with half cut solar cells can have junction boxes that are split into three, as you can see in this picture of  half cut panel. The middle box is for the middle bypass diode.

split junction box
split junction box

A split junction box leads to lesser metallization than a standard panel in comparison to poly or mono panels and creates lesser internal resistance which saves space.

Other Products

The Articles You may Like

Product Tags: mono percsolar module 340w120 cells

    Request Product Price

    * Required

    Electrical Data
    Maximum Power (Pmax)340Wp
     Maximum Power Voltage (Vmp)34.6V
    Maximum Power Current (Imp)9.79A
    Open Circuit Voltage (Voc)41.2V
    Short Circuit Current (Isc)10.29A
    Power Tolerance(Positive)5%
    Module Efficiency STC19.91%
    Maximum System Voltage1000VDC (IEC), 600VDC(UL)
    Series Fuse Rating15A
    Temperature Coefficient of Pmax-0.36%/°C
    Temperature Coefficient of Voc-0.28%/°C
    Temperature Coefficient of Isc0.04%/°C
    Application ClassClass A
    Qualification Test Parameters
    Dielectric Insulation Voltage6000VDC max
    Operating Temperature Range-40°C to +85°C
    Max. Snow Load5400Pa
    Max. Wind Load2400Pa
    Hailstone Impact25mm(1inch) at 23m/s(52mph)
    Fire RatingClass C
    Nominal Operating Cell Temperature(NOCT)45±2°C
    Mechanical Characteristics
    Cell TypeMonocrystalline 158.75×79.36mm / 5BB PERC
    Cell Number120 (6×20)
    Dimensions (mm)1708x1000x35
    No. of Draining Holes in Frame16
    Front Glass3.2 mm, High Transmission, Low Iron,Tempered Glass
    Frame TypeClear Anodized Aluminium Alloy Type 6063T5
    Junction Box Protection ClassIP 68 Rated
    Connector TypeCompatible type MC4
    Output CablesTUV 1×4 mm² / UL 12AWG, Length:300±5 mm
    Packing Configuration
    Packing Type31Pcs/CTN, 2Pcs/CTN
    Container Loading858Pcs/40HQ, 330Pcs/20GP
    Standard Test Conditions (STC): Irradiance 1000W/m2, AM 1.5, Cell temperature 25°C

    Nominal Operating Cell Temperature (NOCT): Irradiance  800W/m2, AM 1.5, Wind Speed 1m/s, Ambient temperature 20°C