1000w split phase power inverter

Prostar PSI1K-12 120V 240V 1000w split phase power inverter 12v 240v

Split Phase Inverter 1000W | 12V | 110Vac/220Vac | 120Vac/240Vac | AC Charge Current: 30A

SKU: PSI1K-12 Category:

Prostar PSI1K-12 120V 240V 1000w split phase power inverter 12v 240v is a combination of an inverter, battery charger, and AC auto-transfer switch into on complete system. It is packed with unique features and it is one of the most affordable inverter charger in the market today. The split phase low frequency pure sine wave inverter is great for your emergency battery backup for when the grid goes down with an unnoticeable transfer time of 10 milliseconds, or for use as a standalone off-grid system. Kill your power bill and save the earth with this inverter charger. This unit is your smart choice for the power at home power backup, RV, truck, vehicle and emergency appliances.

Prostar split phase inverter

Prostar PSI series wide selection of 120V/240V split phase inverter chargers goes from 1000 watts, 2000 watts, 3000 watts to 6000 watts with DC input of 12Vdc, 24Vdc & 48Vdc.

Prostar PSI1K-12 120V 240V 1000w split phase power inverter 12v 240v is a type of single-phase three-wire mid-point neutral power distribution system commonly found in North America with a standard phase-neutral voltage of 120 Vac for residential and light commercial applications. Circuit breaker panels typically have two hot wires, and a neutral, connected at one point to the grounded center tap of a local transformer. The phase to phase (Live to Live) voltage is 240Vac for heavy industrial loads such as compressors, fridge, and pumps.

Wiring regulations govern the application of split-phase circuits. Since the neutral (return) conductor is not protected by a fuse or circuit breaker, a neutral wire can be shared only by two circuits fed from opposite lines of the supply system. Two circuits from opposing lines may share a neutral if both breakers are connected by a bar so that both trip simultaneously, this prevents 120 V from feeding across 240 V circuits.

Split Phase Inverter Features & Benefits 

1 – Pure sine wave inverter
2 – Built-in isolation transformer
3 – 3 times surge capability for different loads like refrigerators or A/C compressors
4 – Selectable charging current
5 – Designed to operate under harsh environment
6 – Split phase output: 240Vac/120Vac or 220Vac/110Vac output
7 – Low DC voltage supports home and office appliances
8 – Auto restart while AC is recovering
9 – Overload and short circuit protection
10 – Smart battery charger design for optimized battery performance and extend battery lifecycle
11 – Cold start function
12 – Compatible to mains voltage or generator power
13 – LCD and LED display to indicate the status of the inverter charger
14 – Power save mode to reduce idle consume
15 – Remote Control panel for indicating the system status (option)

Split Phase Inverter Details

Prostar split phase inverter Display

Prostar split phase inverter Rear

Prostar split phase inverter Details -3

Split Phase Inverter Connection

Split Phase inverter diagram

Other Products

The Articles You may Like

    Request Product Price



    * Required

    ModelPSI1K-12
    RATED POWER1000W
    Dimension DxWxH (mm)466x277x196
    Net Weight (kgs)12.60
    AC INPUT
    AC Voltage220VAC/230VAC/240VAC
    Maximum Voltage270VAC
    Frequency50/60 Hz±2.5Hz  (Auto sensing)
    Efficiency> 95%
    OUTPUT
    AC Voltage Regulation220VAC or 230VAC or 240VAC ± 10% (HOT1 – HOT2)
    110VAC/110VAC or 115VAC/115VAC or 120VAC/120VAC ± 10% (HOT1 – N / HOT2 – N)
    Frequency50Hz/60HZ±0.3Hz Auto(settable)
    Surge Power3000W
    Overload Capacity<=110% alarm 5mins then stop output and fault code 07; <=125% alarm 60s then stop output and fault code 07; > 125% alarm 10s then stop output and fault code 07
    Inverter Efficiency83%
    Transfer Time< 10ms
    WaveformPure Sine Wave
    BATTERY
    Battery Voltage12VDC
    Minimum Start Voltage11VDC
    Low Battery Voltage Trip10VDC – 10.5VDC
    Low Battery Voltage Alarm10.5VDC – 11VDC
    High Battery Voltage Alarm14.8VDC – 15.5VDC
    Power Saver Mode30 Watts @110VAC or 115VAC or 120VAC,  60 Watts @220VAC or 230VAC or 240VAC
    Boost Charge Voltage14.1VDC default (13.8VDC-14.5VDC Adjustable)
    Float Charge Voltage13.5VDC default (13.5VDC-13.7VDC Adjustable)
    AC Charge Current30A
    ENVIRONMENT
    Humidity10~93%(No condensation)
    Temperature-10℃ ~ 50℃
    Altitude≤3000m
    CommunicationUSB/BTS/AGS
    Product specifications are subject to change without further notice.