Split Phase Inverter 5000W | 48V | 110Vac/220Vac | 120Vac/240Vac | AC Charge Current: 35A
Prostar PSI5K-48 48v pure sine wave split phase inverter 5000w 240v is a combination of an inverter, battery charger, and AC auto-transfer switch into on complete system. It is packed with unique features and it is one of the most affordable inverter charger in the market today.
The low frequency 48v pure sine wave split phase inverter 5000w 240v is great for your emergency battery backup for when the grid goes down with an unnoticeable transfer time of 10 milliseconds, or for use as a standalone off-grid system. Kill your power bill and save the earth with this inverter charger. This unit is your smart choice for the power at home power backup, RV, truck, vehicle and emergency appliances.
Prostar PSI series wide selection of 120V/240V split phase inverter chargers goes from 1000 watts, 2000 watts, 3000 watts to 6000 watts with DC input of 12Vdc, 24Vdc & 48Vdc.
Prostar PSI5K-48 48v pure sine wave split phase inverter 5000w 240v is a type of single-phase three-wire mid-point neutral power distribution system commonly found in North America with a standard phase-neutral voltage of 120 Vac for residential and light commercial applications. Circuit breaker panels typically have two hot wires, and a neutral, connected at one point to the grounded center tap of a local transformer. The phase to phase (Live to Live) voltage is 240Vac for heavy industrial loads such as compressors, fridge, and pumps.
Wiring regulations govern the application of split-phase circuits. Since the neutral (return) conductor is not protected by a fuse or circuit breaker, a neutral wire can be shared only by two circuits fed from opposite lines of the supply system. Two circuits from opposing lines may share a neutral if both breakers are connected by a bar so that both trip simultaneously, this prevents 120 V from feeding across 240 V circuits.
1 – Pure sine wave inverter
2 – Built-in isolation transformer
3 – 3 times surge capability for different loads like refrigerators or A/C compressors
4 – Selectable charging current
5 – Designed to operate under harsh environment
6 – Split phase output: 240Vac/120Vac or 220Vac/110Vac output
7 – Low DC voltage supports home and office appliances
8 – Auto restart while AC is recovering
9 – Overload and short circuit protection
10 – Smart battery charger design for optimized battery performance and extend battery lifecycle
11 – Cold start function
12 – Compatible to mains voltage or generator power
13 – LCD and LED display to indicate the status of the inverter charger
14 – Power save mode to reduce idle consume
15 – Remote Control panel for indicating the system status (option)
|Dimension DxWxH (mm)||621x277x186|
|Net Weight (kgs)||27.00|
|Frequency||50/60 Hz±2.5Hz (Auto sensing)|
|AC Voltage Regulation||220VAC or 230VAC or 240VAC ± 10% (HOT1 – HOT2)|
|110VAC/110VAC or 115VAC/115VAC or 120VAC/120VAC ± 10% (HOT1 – N / HOT2 – N)|
|Overload Capacity||<=110% alarm 5mins then stop output and fault code 07; <=125% alarm 60s then stop output and fault code 07; > 125% alarm 10s then stop output and fault code 07|
|Transfer Time||< 10ms|
|Waveform||Pure Sine Wave|
|Minimum Start Voltage||44VDC|
|Low Battery Voltage Trip||40VDC – 42VDC|
|Low Battery Voltage Alarm||42VDC – 44VDC|
|High Battery Voltage Alarm||59.2VDC – 62VDC|
|Power Saver Mode||30 Watts @110VAC or 115VAC or 120VAC, 60 Watts @220VAC or 230VAC or 240VAC|
|Boost Charge Voltage||56.4VDC default (55.2VDC-58.0VDC Adjustable)|
|Float Charge Voltage||54.0VDC default (54.0VDC-54.8VDC Adjustable)|
|AC Charge Current||35A|
|Temperature||-10℃ ~ 50℃|
|Product specifications are subject to change without further notice.|