Prostar PIS10K 48v mppt 160a off grid solar 10kw hybrid inverter single phase is a powerful and versatile piece of equipment, it combines the functionality of both a solar inverter and a battery inverter.
PIS10K 48v 10kw hybrid inverter single phase can work with solar panels, utility and battery storage, allowing homeowners and businesses to maximize their energy independence and minimize their reliance on the grid.
The 160A MPPT solar controller allows the inverter to efficiently convert DC power generated by solar panels into AC power. It can power your home or business. This controller is capable of handling a wide range of solar panel configurations, allowing you to customize your system to meet your specific energy needs.
The 48v single phase 10kW hybrid inverter is also compatible with LiFePO4 batteries. These batteries are high energy density, long lifespan, and safety features, making them an excellent choice for backup power systems. When connected to the hybrid solar inverter, these batteries can store excess energy generated by solar panels during the day. And you can use it during power outages or when solar panels are not producing energy.
This hybrid inverter also comes equipped with a range of advanced features, including overload protection, and short circuit protection. These features help to ensure that your system operates safely and efficiently, even in the event of unexpected power surges or other disruptions.
10KW Hybrid Inverter Features
- Pure sine wave inverter
- Built-in 160A MPPT solar charge controller
- Selectable input voltage range for home appliances and personal computers
- Selectable charging current
- High PV input voltage range (120VDC – 430VDC)
- Can provide power to the loads without battery
- Configurable AC/solar input priority via LCD setting
- Compatible to mains voltage or generator power
- Auto restart while AC is recovering
- Overload and short circuit protection
- Smart battery charger design for optimized battery performance and extend battery lifecycle
- Cold start function
- Support USB, RS232 monitoring function
- WIFI remote monitoring (optional)
Hybrid Solar Inverter Overview
1.LCD Display 9. AC INPUT Terminal
2.Line Indicator 10. RS232 Port
3. Inverter Indicator 11. USB Port
4. Charger Indicator 12. Power ON/OFF
5. Fault Indicator 13. Parallel Communication Port(only for 5kVA)
6. Function Buttons 14. Battery Connectors
7. AC INPUT Fuse (Dual) 17. #PV1 INPUT Connectors
8. AC OUTPUT Terminal 18. #PV2 INPUT Connectors
MPPT Solar Inverter Highlight
Choose your solar inverter in best running way, including working without battery.
The 10kW hybrid inverter is also designed to be easy to install and use. It has a user-friendly interface that allows you to monitor and control your energy usage and battery storage. It also has a built-in AC charger that can be used to charge your batteries during off-peak hours or when the grid is down.
Solar Panel Configuration
How many solar panels do you need to run a 10kw solar inverter system?
When selecting proper PV modules, please be sure to consider below parameters:
- Open circuit Voltage (Voc) of PV modules not exceeds max. PV array open circuit voltage of solar inverter.
- Open circuit Voltage (Voc) of PV modules should be higher than min. battery voltage.
Model | 3KVA | 5KVA | 10KVA |
Battery Voltage | 24VDC | 48VDC | 48VDC |
Max. PV Array Open Circuit Voltage | 450VDC | ||
PV Array MPPT Voltage Range | 120VDC – 430VDC |
Take 450Wp PV module as an example. After considering above two parameters, the recommended module configurations are listed as below table.
PV module specification (reference)
– 450Wp -Vmp: 33.91V -Imp: 13.27A -Voc: 41.18V -Isc: 13.85A |
Model | SOLAR INPUT
(Min. in serial: 5 PCs; Max. in serial:10 PCs ) |
No. of PV module | Total of Power | ||
3KVA |
5KVA |
10KVA |
5 PCs in series | 5 PCs | 2250W | |
6 PCs in series | 6 PCs | 2700W | ||||
8 PCs in series | 8 PCs | 3600W | ||||
— | 10 PCs in series | 10 PCs | 4500W | |||
* 6 PCs in series and 2 groups are connected to PV1 and PV2 respectively. | 12 PCs | 5400W | ||||
— | * 8 PCs in series and 2 groups are connected to PV1 and PV2 respectively. | 16 Pcs | 7200W | |||
* 10 PCs in series and 2 groups are connected to PV1 and PV2 respectively. | 20 Pcs | 9000W | ||||
* 6 PCs in series, 2 sets in parallel, then 2 groups are connected to PV1 and PV2 respectively. | 24Pcs | 10800W | ||||
* The power input of PV1 and PV2 connected to the photovoltaic system must be equal. |
Hybrid Solar Inverter 10KW Details
The Articles You may Like
- What size inverter should I buy?
- Chooce your best value mppt solar charge controller
- How to change a UPS battery backup by yourself
- Rack Mount UPS – How to Choose for Servers and Home Network?
- Why Do We Need Split Phase Solar Inverter
- Off grid solar inverter charger vs regular inverter
- True online UPS system for railway signaling
- Solar inverter – Wikipedia