MPS200K-50K double conversion modular power supply ups 200 kva
Modular UPS | 200kVA/200kW | 3 Phase 4 Wires | +/-192VDC~+/-240VDC | 4 x 50KW Power Module
Prostar MPS200K-50K double conversion modular power supply ups 200 kva designed for mission-critical applications demanding maximum uptime and scalability. With a total capacity of 200 kVA (scalable from 50 kVA modules), this UPS 200kVA delivers pure sine wave output. It utilizes true online double conversion technology. This ensures zero transfer time. It also provides complete isolation from power disturbances like surges, sags, and harmonics.
Hot-swappable 50 kVA power modules allow for easy expansion up to 200 kVA. They also provide N+1 redundancy. This setup minimizes downtime during maintenance or growth.
Modular UPS 200kVA Key Features
True Online Double-Conversion Topology
It continuously converts incoming AC power to DC. Then, it converts it back to pure AC. This process provides complete isolation from input disturbances, including surges, sags, noise, frequency variations, and harmonics. Output is always stable and clean, regardless of utility power quality.
Scalable Design
Start with the capacity you need today. Scale vertically by inserting additional modules as your power requirements grow. There is no need to replace the entire system.
Hot-Swappable Power Modules
The system utilizes high-density 50 kW (or 50 kVA) intelligent power modules.
High Efficiency
Operating in ECO mode can achieve efficiency levels of up to 98.5%, significantly reducing energy costs and heat generation.
LCD Touch Screen
Offers an intuitive user interface for easy monitoring and configuration, along with remote access for convenience and management.
Intelligent Monitoring
Equipped with a smart monitoring system, the modular ups 200kva provides real-time data on power usage, battery status, and overall system health through a user-friendly interface.
Supports Parallel Operation
Allows for increased capacity and redundancy by connecting multiple UPS units in parallel, suitable for growing data center needs.
Modular Design for Flexible Expansion
The modular UPS 200kVA guarantees uninterrupted power, ensuring the continuous operation of critical equipment and preventing costly downtime. High efficiency leads to reduced operational costs. The modular nature allows users to invest in additional capacity as needed. This can be done without a complete system overhaul.
This modular UPS is designed with 50kVA/50kW power modules, allowing fast installation and flexible upgrades. When a module needs maintenance, it can be replaced quickly. This is possible through a hot-swappable structure, which significantly reduces system downtime. It also helps lower maintenance costs. More details: MPS50K 3 phase modular ups hot-swappable power module 50kW
7-inch LCD Display
The 7-inch touch LCD display is integrated into the modular UPS 200kVA. It is a user-friendly, high-resolution capacitive touchscreen interface. This interface is designed to provide intuitive real-time monitoring. It also allows control and configuration of the entire power system.
Intuitive Graphical Interface — Modern, icon-based layout with clear menus, real-time dashboards, and color-coded status indicators (green for normal, yellow for warning, red for fault/alarm).
Real-time Monitoring — Displays critical parameters such as:
- Input/output voltage, current, frequency, and power (kVA/kW)
- Load percentage and crest factor
- Battery voltage, charge/discharge current, remaining runtime, and capacity
- Inverter/bypass/rectifier status
- Module status (each 50 kW power module)
Alarm & Event Management — Full fault records, operation logs, and predictive warnings with timestamps; supports detailed alarm descriptions and troubleshooting guidance.
Intelligent Battery Management System
The Intelligent Battery Management System (IBMS) in the modular UPS 200kVA is an advanced, microprocessor-controlled feature. It optimizes battery performance and extends service life, also enhances safety and ensures reliable backup power during outages. It actively monitors the external battery bank. The modular ups charges and maintains it. This ensures maximum runtime and minimizes total cost of ownership (TCO).
- Periodic automatic battery discharge tests (user-scheduled or on-demand) verify actual backup capability without interrupting the load.
- Equalization charging mode activates as needed to balance cell voltages and correct sulfation in lead-acid batteries.
- Supports cold-start capability from batteries even if utility power is unavailable.
-
Works with external battery packs (lead-acid VRLA, flooded, or lithium-ion options in supported variants).
-
Integrates seamlessly with the UPS’s DSP-based control system for coordinated operation during transitions (e.g., smooth handover to inverter during blackouts).
Technical Specification
| Item | Specification |
|---|---|
| UPS Type | Modular Online UPS (Double Conversion) |
| Rated Capacity | 200kVA / 200kW |
| Power Factor | 1.0 |
| Power Module | 50kVA / 50kW |
| Phase | 3 Phase In / 3 Phase Out |
| Input Voltage | 380/400/415Vac (optional) |
| Output Voltage | 380/400/415Vac |
| Input Frequency | 50/60Hz, 40Hz ~70Hz |
| Output Frequency | 50/60Hz, 46Hz ~ 54Hz or 56Hz ~ 64Hz |
| Transfer Time | 0ms |
| Battery Voltage | ±192VDC ~ ±240VDC |
| Output Waveform | Pure Sine Wave |
| Efficiency | Utility Mode: 95.5%; ECO Mode: 98.5%; Battery Mode: 94.5% |
| Overload Capacity | 60 mins for 110%, 10 mins for 111%-120%,; 1 min for 121%-150%, 200ms for >150% |
| Display | LCD display |
| Communication | RS232 / RS485 / Dry Contact / SNMP (optional) |
| Parallel Function | Supported |
| Protection | Overload, short circuit, over-temperature, battery low voltage, etc. |
| Application | Data center, telecom, hospital, industrial, banking |
Modular UPS vs Traditional UPS (Comparison)
| Item | Modular Online UPS | Traditional Online UPS |
|---|---|---|
| Capacity Expansion | Flexible and scalable | Fixed capacity |
| Maintenance | Hot-swappable, fast repair | Longer downtime |
| Reliability | Supports N+1 redundancy | Limited redundancy |
| Installation | Easier and faster | More complex |
| Total Cost | Lower long-term cost | Higher long-term cost |
| Downtime Risk | Very low | Higher |
Online UPS Details
System Input Information
Power Module Input Information
Typical Applications
- Medium to large data centers and server rooms
- Industrial automation and process control systems
- Financial trading floors and banking infrastructure
- Telecom base stations and switching centers
- Healthcare facilities and medical imaging equipment
- Transportation control systems and critical infrastructure
The Articles You may Like
- The 10KW Solar Inverter Single Phase Paving the Way for a Sustainable Future
- Stand-alone power system – Wikipedia
- What is the CT Sensor in Solar Inverter On Off Grid
- How to Choose Online UPS for Boiler System Backup Power
- Why Rack Mount UPS Power Supply is Vital for Industrial Automation and Efficiency
- How Industry Online UPS is Changing the Power Game
| Model | MPS200K-50K |
| PHASE | 3-phase in/3-phase out |
| CABINET CAPACITY* | 200kVA / 200kW |
| BATTERY TYPE | External Battery |
| POWER MODULE CAPACITY | 50kVA / 50kW |
| MAX. POWER MODULE NO. | 4 |
| SWITCHES NO. | 4 |
| INPUT | |
| Nominal Voltage | 380VAC/400VAC/415VAC (3P+N+PE) |
| Voltage Range | 110-300VAC@50% load; 176-276VAC@100% load |
| Nominal Frequency | 50/60Hz (Auto Sensing) |
| Frequency Range | 40Hz ~70Hz |
| Power Factor | > 0.99 @ 100% Load, >0.98 @ 50% Load |
| Harmonic Distortion (THDi) | < 4% @ 100% load |
| OUTPUT | |
| Nominal Voltage | 380VAC/400VAC/415VAC (3P+N+PE) |
| Voltage Regulation (Steady state) | ≦ ± 1% Typical (balanced load) ; ≦ ± 2% Typical (unbalanced load) |
| Voltage Regulation (Transient) | ≦ ± 5% Typical |
| Nominal Frequency | 50/60Hz |
| Frequency Range (Synchronized) | 46Hz ~ 54Hz or 56Hz ~ 64Hz |
| Overload Capability | 60 mins for 110%, 10 mins for 111%-120%,; 1 min for 121%-150%, 200ms for >150% |
| Harmonic Distortion | ≦2% THD (Linear Load) ; ≦ 4% THD (Non-linear Load |
| Efficiency | Utility Mode: 95.5%; ECO Mode: 98.5%; Battery Mode: 94.5% |
| Crest Factor | 3:1 |
| Wave Form | Pure Sine Wave |
| BATTERY / CHARGER | |
| Nominal Voltage | +/- 192V ~ +/- 240V(Selectable) |
| Maximum Voltage | +/- 240V (12V x 40 pcs) |
| Minimum Voltage | +/- 192V (12V x 32 pcs) |
| Float Charging Voltage | 2.28V / Cell (2.25V ~ 2.33V selectable) |
| Boost Charging Voltage | 2.35V / Cell |
| Temperature Compensation | Yes |
| Max. Charging Current (Per Power Module) | 12A (Adjustable) |
| PHYSICAL | |
| Cabinet Dimension (D x W x H) mm | 587 x 845 x 1383 |
| Net Weight (Kg) | 288 |
| ENVIRONMENT | |
| Operating Temperature | 0 ~ 40°C |
| Relative Humidity | 0 ~ 95% non-condensing |
| Altitude | <1000m for Nominal power |
| IP Class | IP 20 |
| MANAGEMENT | |
| Smart RS-232/USB | Supports Windows 2000/2003/XP/Vista/2008, Windows 7/8, Linux, Unix, and MAC |
| Optional SNMP | Power management from SNMP manager and web browser |
| STANDARDS | |
| Safety | IEC/EN 62040-1 |
| EMC | IEC/EN 62040-2 Category C3 |
Download CATALOG
