PSM Max 3.6KW RGB light 24v hybrid solar inverter with wifi module
Hybrid Solar Inverter | 3600VA/3600W | 24VDC | 80A MPPT Solar Charge Controller | PV INPUT: 120VDC ~ 450VDC | WIFI
PSM Max 3.6KW RGB light 24v hybrid solar inverter with wifi module can work with a high voltage photovoltaic field, just like the grid-tie inverters which simplifies the connection, increases efficiency and reduces high current losses.
Prostar PSM Max is a new generation inverter technology that comes with an inbuilt Wifi monitoring device and company fitted battery wire, AC DC Distribution Box. This inverter comes with elegant RGB lights on the front, different color to present output source from PV, Grid or battery and battery charge/discharge status.
PSM Max 3.6KW hybrid solar inverter can accept a high PV voltage range (120~450vdc) and it will facilitate PV system installation easily.
PSM Max 3.6KW RGB light 24v hybrid solar inverter with wifi module is a very economical choice for demanding customers who want to own a reliable quality product and trouble-free operation of their installation.
Max 3.6KW Hybrid Solar Inverter Features
- Customizable status LED bar with RGB lights
- Removable LCD control module with multiple communications interface for BMS(RS485, CAN-BUS, RS232)
- Pure Sine Wave Output
- Integrated 80A MPPT solar charge controller
- Built-in WIFI module for mobile monitoring (Android App is available)
- Built-in anti-dusk kit
- Can run without battery bank connection
- Supply load from Grid or PV, even battery is not available
- Configurable AC/PV output usage timer and prioritization
- Selectable high power charging current
- Selectable input voltage range for home appliances and personal computers
- Compatible to Utility Mains or generator input
- Auto restart while AC is recovering
- Suitable for lead acid battery, gel battery, lithium battery(with BMS communication)
- Cold start function
Hybrid Solar System Overview
This inverer can power various appliances in home or office environment, including motor-type appliances, such as tube light, fan, refrigerator and air conditioners.
Depending on different power situations, this hybrid inverter is designed to generate continuous power from PV solar modules, battery, and the utility. When MPPT input voltage of pv modules is within acceptable range, this inverter is able to generate power to feed the grid(utility) and charge the battery. Galvanic isolation designed between PV/DC and AC output, so that the users could connect any type of PV array to this hybrid inverter.
Inverter Overview
Remote Display Panel Installation
The LCD display module can be removable and installed in a remote location with an optional communication cable.
Step one: Remove the screw on the bottom of LCD module and pull down the module from the case. Detach the cable from the original communication interface. Be sure to replace the retention plate back to the inverter.
Step two: Prepare your mounting holes in the marked locations as shown in the illustration below. The LCD module can be securely mounted to your desired location.
Step three: After LCD module is installed, connect LCD module to the inverter with an optional RJ45 communication cable.
LCD Display Information
Hybrid Solar Inverter Packing
The Articles You may Like
| Model | PSM3.6K-MAX |
| PHASE | 1-phase in/1-phase out |
| RATED POWER | 3600VA/3600W |
| Dimension DxWxH (mm) | 148x433x554 |
| Net Weight (kgs) | 14.1 |
| INPUT | |
| Voltage | 230 VAC |
| Selectable Voltage Range | 170-280 VAC (For Personal Computers) |
| 90-280 VAC (For Home Appliances) | |
| Frequency Range | 50 Hz/60 Hz (Auto sensing) |
| OUTPUT | |
| AC Voltage Regulation (Batt. Mode) |
230VAC ± 5% |
| Surge Power | 7500VA |
| Efficiency (Peak) | 90% – 93% |
| Transfer Time | 15 ms (For Personal Computers); 20 ms (For Home Appliances) |
| Waveform | Pure sine wave |
| BATTERY | |
| Battery Voltage | 24 VDC |
| Floating Charge Voltage | 27 VDC |
| Overcharge Protection | 33 VDC |
| SOLAR CHARGER & AC CHARGER | |
| Maximum PV Array Power | 4000W |
| MPPT Range @ Operating Voltage | 120VDC ~ 450VDC |
| Maximum PV Array Open Circuit Voltage | 500VDC |
| Maximum Solar Charge Current | 80A |
| Maximum AC Charge Current | 80A |
| Maximum Charge Current | 80A |
| AC charger and solar charger can’t work at the same time | |
| Maximum Efficiency | 98% |
| Standby Power Consumption | <45 W |
| OPERATING ENVIRONMENT | |
| Communication Interface | USB/RS232/RS485/Wifi/Dry Contact |
| Humidity | 5% to 95% Relative Humidity(Non-condensing) |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -15°C to 60°C |
Download Product Brochure
You must be logged in to post a comment.