A photovoltaic (PV)  junction box is an important part of the solar panels. The junction box is an enclosure on the module where the PV strings are electrically connected.

The majority of junction box manufacturers are nowadays based in China.

How is the junction box connected to the solar panel?

A PV junction box is attached to the back of the solar panel (TPT) with silicon adhesive. It wires the (usually) 4 connectors together and is the output interface of the solar panel.

How to connect the solar panel junction box to the solar array?

With the use of a junction box, it becomes easy to connect the solar panel to array. Usually cables with MC4 / MC5 connectors at the end are used.


A good junction box keeps corrosion at the terminals to a minimum, as it will exclude water coming in.

When purchasing solar modules, always have a look at the IP rating of the PV junction box. A completely water tight junction box carries IP 67.

How does the PV junction box protect the solar panel?

Most photovoltaic junction boxes have diodes. The function of the diodes is to keep the power flow going in one direction, and prevent power from feeding back into the panels when there’s no sunshine.

A quality PV junction box is certified (e.g. via TÜV) and regulates the heat and offers reliable long-term safety.

Also You May Like:

Prostar > About Prostar

Prostar > Professional Team

Prostar > OEM and ODM Service

Prostar > Inverter

Prostar > Prostar Google Drive 

[contact-form-7 404 "Not Found"]
%d bloggers like this: