MPPT charge controller | 80A | 48V | PV Voltage: 225Vdc
Prostar MCL8048 48v mppt 80a solar charge controller for lifepo4 batteries adopts advanced DSP digital control technology.
MPPT solar charge controller has an advanced tracking algorithm to obtain the maximum power of PV module to charge the batteries.
The mppt 80a solar charge controller optimizes battery charging, can extend battery life and improve the system performance. Its comprehensive self-test and electronic protection functions can avoid damage caused by installation errors or system failures.
The MPPT function is a natural adjunct to the DC-DC charger function and there are several quality brands that provide this with more under development.
A single unit can be used by itself as it automatically switches between alternator charging and solar charging. For larger systems, our favoured arrangement is to use a separate MPPT controller for the fixed roof mounted panels and use the combined MPPT/DC-DC with portable panels.
The mppt solar charge controller is designed with 3-stage battery charging algorithm for fast, efficient, and safe battery charging.
Prostar’s MPPT, or Maximum Power Point Tracking, controllers will maximize the production output of your solar system.
Model | MCL8048 | |
MPPT Efficiency | ≥99.5% | |
System Voltage | 48V | |
Dimension | 359x240x114mm | |
Net Weight | 7.25 Kgs | |
INPUT | ||
Max. PV Input Voltage | 225VDC | |
MPPT Operating Voltage Range | 12V | – |
24V | – | |
48V | 65VDC-150VDC | |
96V | – | |
Low Voltage Protection | 12V | – |
24V | – | |
48V | 60VDC | |
96V | – | |
High-voltage Protection | 230VDC | |
PV Rated Input Power | 12V | – |
24V | – | |
48V | 4560W | |
96V | – | |
DC LOAD OUTPUT | ||
Load Voltage | Same as battery voltage | |
Load Current | 20A | |
CHARGE | ||
Battery Type | Sealed Lead Acid, Gel, Flooded, Lithium-ion, User-defined | |
Charging Mode | MPPT (Maximum Power Point Tracking) | |
Charging Current | 80A | |
Charging Method | Three-stage: CC (Constant current) – CV (Constant voltage) – CF (Float charge) | |
Float Charging Voltage (Lead Acid Default) |
12V | – |
24V | – | |
48V | 55.2VDC (Settable) | |
96V | – | |
Boost Charging Voltage (Lead Acid Default) |
12V | – |
24V | – | |
48V | 58.0VDC (Settable) | |
96V | – | |
SYSTEM | ||
Protection Function | Input low/over voltage, input/output polarity reverse connection, short circuit, over temperature, battery shedding etc. | |
Display | LED + LCD | |
Communication | RS485 (optional) | |
ENVIRONMENT | ||
Relative Humidity | 5% ~ 90% (Non-condensing) | |
Altitude | < 3000m | |
Operating Temp. | -20℃~+40℃ | |
Protection Level | IP21 |
You must be logged in to post a comment.